The WIFI connection and signal that you have at home are essential to be connected to the Internet. Navigation with computers, telephones, and other mobile devices depends fundamentally on the type of WIFI signal received. Therefore, it is important that you make sure that the signal is good or powerful enough not to have problems in this regard, especially in the event of any emergency. There are homes where the WIFI signal can be very good in some rooms and quite bad in others. The position of the router and the position of the antennas are aspects to take into account in this regard.
To discover how to amplify the WIFI signal so that it perfectly reaches all the rooms in your house, we recommend that you continue reading this article.
Antenna position
If you want to know how to have more WIFI at home, you must first know that, although not all routers have antennas, in the event that yours does, it is important to position them well to optimize the WIFI signal throughout the home. Therefore, it is best to place the antennas perpendicular to each other, that is, one vertically and the other horizontally. Also, make sure that the antennae draw a 90-degree angle to each other. In this way, the coverage of your devices will improve and the signal will not be so poor when you move away from the router.
Router placement
And how to have a good WIFI signal? Well, correctly placing the router device is essential to have a good WIFI signal throughout the house. For this reason, the most logical and recommended thing to do is to position it in the center of the area you want to cover since if it is placed at one of the ends, the signal will have too much distance going through many walls to reach the rooms that are in the other end. This translates into poor coverage in those rooms.
It is also important to place the router in an area out of obstacles. For this reason, if you put it in the center of the home, but it is surrounded by furniture, pots, or even in a closed room, the WIFI signal will not be optimal. Also, you should try to place it in a high position: this type of device sends waves downwards, so to make the most of its range it is advisable to raise it as much as possible.
Update the firmware of the router
Talking about firmware is thinking about the program in charge of controlling the electronic circuits of routers and any other device. This is a program that knows perfectly what the device’s function is and checks that it works correctly.
Due to its great importance in the router, it is essential to keep the firmware updated to optimize the WIFI signal. In some cases, it updates automatically, but some models require a manual update. To do it correctly, consult the router’s instruction manual or access the device’s configuration page to find out how to have a stronger WIFI signal. Finally, look for some options to track updates.
Channels of less saturation
Do you wonder how to extend the WIFI signal? Well, you can also extend the signal of the router or improve the WIFI signal at home by changing the WIFI channel. To achieve this, follow these simple steps:
Access the device configuration page
Access the Control Channel option, that is, channel control. This option is used to choose one of the channels for your router to operate. By default, it will be configured to automatically choose the least cluttered channel, but this auto mode is not always effective or reliable, so it should be checked.
You should pay special attention to the congestion of the WIFI channels of the router if you live in a neighborhood community since the WIFI signals from the neighborhood could interfere with your home.
If, in addition to this information, you want to know how to choose the best WIFI channel, do not miss this article. Enjoy the Internet without interruptions!
Choose between 2.4 and 5 GHz WIFI bands
The vast majority of current WIFIs have dual-band technology, so the router creates two different types of WIFIs for the bands: 2.4 and 5 GHz.
- The 2.4 GHz band tends to have a slower connection due to more interference. In addition, it has fewer channels, becoming saturated earlier. Are you wondering how to make the WIFI go further or how to make the WIFI signal reach the whole house? Well, this band is the solution, its great advantage is that it has a greater range than the 5 GHz bands, giving coverage to more rooms in the home.
- The 5 GHz band is less used and therefore has less interference. It also has more channels that are distributed among the devices connected to the WIFI, thus avoiding saturation. It has a worse range and more difficulties to overcome obstacles, but its connection speed is higher, making the devices connected to it have a better connection.
Taking into account the characteristics of the two WIFI bands, choose the one that interests you the most: if you have good coverage at home, the 5 GHz band is the most optimal for devices that require a high connection speed, although they cannot go far from the router.
WIFI repeaters, PLCs, and Mesh networks
WIFI repeaters are an economical alternative to amplify the WIFI signal at home. They are in charge of capturing the signal corresponding to the WIFI network of your home and amplifying it so that it has a greater range. This signal amplified by the WIFI repeater is the same as the one sent by the router, keeping the same name and password for the WIFI.
PLCs are the alternative to WIFI repeaters. They are also responsible for expanding the Wi-Fi signal, but in this case, they obtain it through electrical wiring. It consists of two devices:
- One was plugged in next to the router and connected to the device via the Ethernet cable.
- Another is through the electrical connection arrived by the repeater, which emits a cloned WIFI signal with the same or different password and name depending on your needs.
And the most complete option and also the most expensive is the Mesh network. It is a WIFI network with several components that share a name and password.
- It has a router that receives a signal from the operator’s modem.
- It has access points or satellites, these act as WIFI signal amplifiers with the aim of expanding the signal. For this reason, on many occasions, they are also called Wi-Fi amplifiers.
Buy a new router
If you are willing to make a significant investment to improve the WIFI signal at home or amplify it, buy a new third-party router or a neutral router that is capable of improving the service offered by the contracted operator. You should also know that this new router must be connected directly to one of the operators you have contracted since the process of replacing the router is quite complex. What do you think of these methods to increase the WIFI signal at home?